About ULTRASET - Self Levelling Compound for Indoor / Outdoor and Commercial Applications 20KG Bag
ULTRASET Premium Indoor & Outdoor Self Levelling Compound:
- High Strength - over 40MPA compressive strength, suitable for residential, commercial, heavy-duty and warehouse applications.
- Super Smooth - with a super smooth and dust-free finish, it is popular with direct-stick floors such as engineered-timber, solid-timber and vinyl plank floors, as well as surface floor coverings e.g. polished concrete.
- Indoor / Outdoor - water-resistant and suitable for interior and exterior usage.
Whilst Flooring Works stocks our standard budget-friendly leveller, we highly recommend the ULTRASET if you are looking for a stronger and smoother surface finish, or for outdoor usage (with a surface sealer).
What is the difference between our standard leveller and our ULTRASET leveller?
ULTRASET is a premium product that features the following:
- Smoother Surface - we use finer polymers and fillers compared to our standard leveller, so the surface comes out much finer and smoother. This makes it popular with direct-stick i.e. glue down floor applications or as polished concrete.
- Higher Surface Strength - with more adhesive-powder and polymers, it is one of the strongest self-levelling compounds in Australia and is over 25% stronger compared to our standard leveller, making it suitable for industrial and commercial applications.
- Indoor & Outdoor Suitable - as a water-resistant leveller, it can be used outdoors in balconies, stadiums, carparks or other areas exposed to the elements (provided it is sealed and covered on the surface).
Finally, due to the improved properties, it is also more DIY and Beginner Friendly because it is more forgiving when not performed to extacting standards. Whilst not recommended, it will mix better (and more evenly) due to the finer materials, and set with a smoother and stronger finish, even if instructions are not followed perfectly or water isn't mixed perfectly. It's easier to get a good outcome with ULTRASET if you're a DIYer or builder without prior experience in self-levelling.
Properties of our ULTRASET Leveller:
Super high-performance self levelling smoothing compound:
- Challenging timber-based substrates (timber-plank, plywood, masonite etc)
- Commercial, industrial and warehouse applications as a surface floor covering (a surface sealer coat is recommended)
- Internal and external (outdoor) usage. A waterproof sealer is recommended for exterior usage.
- Wet area usage e.g. bathrooms and saunas.
- Can be used to level and repair concrete substrates prior to epoxy coatings
This is a medium to heavy load trafficable (when sealed) levelling compound and suitable for forklifts, pallet trucks - with impact loading.
Thickness (can be poured in a single application):
- General Use: 1.5mm - 50mm
- Pouring up 50mm in a single pour is achieved through exceptionally high polymer content and reduced sand and cement that typically sinks to the bottom.
- In certain applications, you can pour up to 100mm, however, you must mix the correct water content and not more than 4.5L
- Timber-Substrates with risk of movement or Industrial Usage (Warehouse / Factory): we recommended a minimum of 5mm, but around 8 - 10mm will provide much better strength and crack resistance. Thickness increases the strength and helps prevent cracking.
Note: Please use with matching Timber & Non-Porous Primer.
Bag Coverage:
≈ 12.25mm / 1m²
≈ 3mm / 4m²
Walking Time:
≈ 2 - 4 hours
Flooring Install:
≈ 24 hours
Mixing Ratio:
4.4 - 4.5L
Working Time:
20 - 30 minutes
Compressive Strength:
Over 40MPa (28 Days)
A super high-strength indoor and outdoor self levelling compound to smooth off uneven construction substrates. It has exceptional cracking resistance with compressive strength of over 40MPa.
It is suitable for residential and heavy duty commercial areas alike, serving as a strong substrate for timber, parquetry, resilient, vinyl, linoleum, carpet and tile floor materials are applied to the surface.
Usage Areas
Our SUPERSET levelling compound is designed to level most substrates:
- Concrete, cement & screed
- New and existing strip timber
- Particleboard, plywood
- Compressed fibre cement flooring, terrazzo, quarry
- Ceramic Tiles
- Over radiant floor heating systems
Note: Not suitable over floating floors, resilient floor coverings and direct stick timber flooring.
Additionally, it is suitable as a surface floor:
- Can be polished (Polished Concrete)
- Pigments can be added for visual colour
- Aggregates can be added for exposed stone effects
- Interior or Exterior (External) use
Product Specifications
Trade Customer? Large Order?
Trade Discount Program
If you’re a professional or a trade customer, whether you’re a flooring installer, builder, developer, handyman or someone with on-going purchases, we’ll can supply to you at wholesale prices. Please note you will need to be a registered and verified trade customer - Trade Application Form.
Volume Discounts & Best Price Guarantee
If you have between 100m2 - 10000m2 of flooring, please contact us or ring us on 1800 312 848 to see if we can help. We guarantee you the best price on the same or comparable quality product.
Estimate shipping
Item already added
The ULTRASET - Self Levelling Compound for Indoor / Outdoor and Commercial Applications 20KG Bag sample is already in your cart