Cemimax A2000 Vinyl Flooring Adhesive / Glue (15kg Drum)

Sale price$138.00

About Cemimax A2000 Vinyl Flooring Adhesive / Glue (15kg Drum)

Our Vinyl Plank Adhesive is specifically designed to make installation of vinyl floors easier. Formulated with excellent plasticizer resistance, it provides a quick initial grab and allows for direct stick application to ensure the best finish and long lasting performance.

A2000 is a modern and contemporary dispersion adhesive for bonding plastic floor coverings and especially rubber/rubber floor coverings.

Coverage Area: 15KG drum covers approximately 50 - 60 sqm. 

Product Features

  • Firm and secure bonding, the flooring is permanently loadable.
  • Good moisture resistance, excellent adhesive bond
  • Very high initial tack and final strength
  • Easy application, easy processing and high wetting.
  • Suitable for use on hot water underfloor heating,
  • Suitable for floor cooling,
  • Suitable for loading by chair castors according to DIN EN 12529,
  • For heavy duty residential and commercial use,
  • Odorless during processing,
  • GISCODE D1 / solvent-free

Technical data

  • Shelf life: min. 12 months
  • Color: cream white
  • Application temperature: min. 15 °C Soil temperature
  • min. 18 °C room air temperature,
  • max. 75% relative humidity,
  • Consumption approx. 250 – 300 g/m2
  • Insertion time: approx. 5 – 30 minutes
  • Pot life: approx. 1 – 2 hours
  • Loadable: after 24 – 48 hours
  • Final strength: after 5 – 7 days


  • Allow primers and fillers to dry thoroughly. The products used in each case can be found in the product data sheet.
  • Stir the product thoroughly before use and apply evenly to the surface of the substrate using A2 or A3 notched trowel and B1 for needlefelt coverings. After a short laying time of 5 – 30 minutes, the adhesive is ready to receive the flooring material.
    (depending on the room climate)
  • After applying the flooring to the subfloor, rub the surface with a cork board or roll it with a roller to remove the trapped air under the flooring. Make sure that the adhesive completely wets the back of the covering material.
  • The adhesive is completely dry after 24 hours and loadable after 48 hours.


  • The product should be protected from frost and direct exposure to light during transportation, storage and use.
  • The application temperature should not be lower than 15 °C floor temperature and 18 °C room air temperature.
  • The tooth bar must be changed regularly to ensure a sufficient quantity of adhesive.
  • Please refer to our product data sheets and safety data sheets as well as the processing instructions of the respective flooring manufacturers.


Product Specifications

Trade Customer? Large Order?

Trade Discount Program

If you’re a professional or a trade customer, whether you’re a flooring installer, builder, developer, handyman or someone with on-going purchases, we’ll can supply to you at wholesale prices. Please note you will need to be a registered and verified trade customer - Trade Application Form.

Volume Discounts & Best Price Guarantee

If you have between 100m2 - 10000m2 of flooring, please contact us or ring us on 1800 312 848 to see if we can help. We guarantee you the best price on the same or comparable quality product.

Estimate shipping

Estimate only, for the best shipping quote, call us on 1800 312 848 or submit a message for us to figure out the best shipping rate for you. All our products are completely stocked in our own Sydney warehouse, and same day pickup is also available.

You may also like