End Border Trim - Mild Grey (Code: 16)

End Trims

Our 2700mm long timber-design aluminium end trims are also known as border or C / U shaped trims. They are perfect for capping the edges of floorboards or joining to other floors and vertical surfaces. Commonly used when the floor heights are similar to each other - this is a less obvious finish.

How to Order End Trims:

1. Calculate Lengths Required - measure up your total metres required and divide by 2.7m and round upwards to the nearest length.
2. Choose the Correct Colour - view from the photo above (not below)
3. Choose the Correct Thickness - add up the total thickness of the floor + underlay (if applicable). The base kit is different for each floor e.g. a 6.5mm laminate would use the 6mm - 7mm Base Kit and a 14mm Engineered Oak with 3mm Rubber Underlay would be 17mm thick and use the 13 - 17mm Base Kit.

Example: End Trim to Join Floor when Meeting Carpet

Example: End Trim to Join Floor when Meeting Tile

Example: End Trim to Join Floor when Sliding Doors

Why Are Trims Important to Flooring?

Trims provide room for floor expansion and contraction and are vital to ensuring the longevity of your floor. Without the correct trims, flooring may buckle, warp or "come upwards" when there is insufficient room for the boards to move. It can also cause damage to the joints and locking systems from too much pressure. All our aluminium trims are 2700mm long, completely waterproof, and mould / rust resistant.

Viewing Colours Online

Please note that colours may appear differently on various screens due to differences in display settings and lighting conditions. We strive to provide accurate representations, but actual product colours may vary slightly from what you see.

Recommended Colours

For all of our flooring products, we have pre-selected the best matching trim colours on each product page. We have the biggest aluminium colour range in Australia, with over 20 colours, but in many instances we can only get to close-match, not exact match.

Colour Sampling

We now provide a COLOUR only sample service - we will post a colour sample to you (not the specific trim you are after). Due to the co-ordination and time involved, we do charge $5 per colour sample. Each colour sample is approximately 10 - 15cm long.